View C052H105J5R5GA7301_9080616.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 1 overview kemets high temperature 200oc epoxy molded radial through-hole ceramic capacitors in x7r dielectric feature a robust and proprietary dielectric system that offers industry-leading performance in extreme high pressure and high temperature environments up to 200c. these capacitors are designed specifcally to withstand the severe shock and vibration conditions associated with deep-well and horizontal drilling activities and are well suited for use in aerospace engine compartments, geophysical probes, hybrid and electric automotive motor drives and defense applications. as high temperature electronic module complexity increases, the size reduction of components becomes more and more critical. these devices are signifcantly smaller by volume than most competitor radial molded capacitors, allowing for downsizing and replacement opportunities of larger high temperature precious metal electrode (pme) and base metal electrode (bme) dielectric system devices. they feature gold-plated lead wires for temperature resistance and an epoxy molded case for environmental protection and mechanical durability. these epoxy molded radial through-hole ceramic capacitors in x7r dielectric achieve high dielectric breakdown, low leakage current and minimal parametric shift while maintaining predictable performance characteristics with respect to variations in temperature, applied voltage and time. these devices are suited for bypass and decoupling applications or for frequency discriminating circuits where q and stability of capacitance characteristics are not critical. capacitance change is limited to 15% from ?55c to +125c and +15%/?55% at +200c. radial through-hole multilayer ceramic capacitors high temperature 200c, radial, molded, x7r dielectric, 50 C 200 vdc (industrial grade) ordering information c 062 h 105 k 5 r 5 g a 7303 ceramic style/ size specifcation/ series capacitance code (pf) capacitance tolerance 1 rated voltage (vdc) dielectric design lead finish 2 failure rate packaging c-spec 3 052 062 h = high temp 200oc two signifcant digits and number of zeros use 9 for 1.0 C 9.9 pf ex. 2.2 pf = 229 j = 5% k = 10% m = 20% 5 = 50 1 = 100 2 = 200 r = x7r 5 = multilayer g = gold (au) a = n/a blank = bulk bag t250 = 250 pcs/ 12" reel t500 = 500 pcs/ 12" reel t1k0 = 1,000 pcs/ 12" reel 7301 = full reel qty/ 12" reel 7303 = full reel qty/ 12" reel 7061 = bulk tray 1 additional capacitance tolerance offerings may be available. contact kemet for details. 2 wire lead materials and fnishes: alternative lead materials and fnishes may be available. contact kemet for details. 3 default packaging for this product series is "bulk bag". kemet will assume "bulk bag" packaging is required when the 15th thru 18th character positions are left blank. 3 c-spec 7301 can only be used when ordering 052 style/size. 3 c-spec 7303 can only be used when ordering 062 style/size. one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 2 dimensions C inches (millimeters) t h 005 () maimum d t h d c052h c02h series s lead spacing l length h height t thickness ld lead diameter ll lead length minimum c052h 0.200.015 (5.080.38) 0.190.01 (4.830.25) 0.190.01 (4.830.25) 0.090.01 (2.290.25) 0.025+0.004/?0.002 (0.635+0.102/?0.051) 1.25 (31.75) c062h 0.290.01 ( 7.37 0.25) 0.290.01 ( 7.37 0.25) 0.090.01 (2.290.25) benefts ? operating temperature range of ?55c to +200c ? x7r temperature stable dielectric ? high shock and vibration capability ? radial through-hole form factor ? gold (au) plated wire lead fnish ? base metal electrode (bme) and precious metal electrode (pme) dielectric systems. ? rohs and reach compliant (most select values) ? military designation styles ck/ckr05 and ck/ckr06 ? molded case ? high breakdown voltage strength ? dc voltage ratings of 50 v, 100 v and 200 v ? capacitance offerings ranging from 1,000 pf to 1.0 f ? available capacitance tolerances of 5%, 10% and 20% ? low esr and esl ? predictable performance characteristics with respect to variations in temperature, applied voltage and time ? non-polar device, minimizing installation concerns ? encapsulation meets fammability standard ul 94vC0 ? halogen-free applications typical applications include decoupling, bypass, smoothing circuits, dc/dc converters, power supplies (input/output flters), noise reduction (piezoelectric/mechanical), circuits with a direct battery or power source connection, critical and safety relevant circuits without (integrated) current limitation and any application that is subject to extreme environments such as high shock and vibration, high temperature, high levels of board fexure and/or temperature cycling. markets include military, industrial, aerospace, and automotive. radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 3 qualifcation these devices are subject to internal qualifcation. details regarding test methods and conditions are referenced in table 2, performance & reliability. environmental compliance rohs compliance is dependent upon series and rated capacitance value. series rated capacitance rohs compliant rohs exemption code 1 halogen free c052h all yes 7(a) yes c062h < 0.27f yes 7(a) yes c062h 0.27f no n/a yes 1 eemmkmktet electrical parameters/characteristics item parameters/characteristics operating temperature range ?55c to +200c capacitance change with reference to +25c and 0 vdc applied (tcc) 15% (?55c to +125c), +15%/?55% (200c) capacitance change with reference to +25c and 100% rated vdc applied +15%/?30% (?55c to +125c), +15%/?60% (200c) aging rate (maximum % cap loss/decade hour) 3% dielectric withstanding voltage 250% of rated voltage (51 seconds and charge/discharge not exceeding 50 ma at 25c ) dissipation factor (df) maximum limit at 25oc 2.50% insulation resistance (ir) limit at 25c 1,000 m microfarads or 100 g (rated voltage applied for 1205 seconds) 6ikevhmrkekmrkvexietegmxergiqiewyviqirxwmrgpyhmrkxspivergievimrhiihxsevijiviixmqisjlsyvw 8ss fxemr-6pmqmxhmmhi1vepyifxligetegmxergierhgsqtevixspmqmx7ipigxxlipsivsjxlixspmqmxw etegmxergierhhmwwmtexmsrjegxsv(qiewyvihyrhivxlijsppsmrkgsrhmxmsrw o, r,erhr: rms metemev rer rms metemev 2emketememmmteekmeekmeee eemem32 post environmental limits high temperature life, biased humidity, moisture resistance dielectric rated dc voltage capacitance value df (%) capacitance shift ir x7r > 25 all 3.0 20% 10% of initial limit radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 4 table 1a C c052 style/size (0.20" lead spacing), capacitance range waterfall (1) to complete ordering code, insert the proper character for capacitance tolerance: (see table above for character defnitions) (1) available capacitance tolerances: j, k, m (2) to complete ordering code, enter the four-digit numeric or alphanumeric "packaging c-spec ordering code." see details below: bl ank = bulk bag t2 50 = 250 pcs / 12" reel t5 00 = 500pcs / 12" reel t1 k0 = 1,000 pcs / 12" reel 73 01 = full reel qty / 12" reel 73 03 = full reel qty / 12" reel 70 61 = bulk tray these products are protected under u.s. patents 7172985 and 7670981, other patents pending, and any foreign counterparts. c052 style/size (0.20" lead spacing) rated voltage (vdc) 50 100 200 voltage code 5 1 2 capacitance capacitance tolerance capacitance code (available capacitance) 1,000 pf j = 5% k = 10% m = 20% c052h102(1)5r5ga(2) c052h102(1)1r5ga(2) c052h102(1)2r5ga(2) 1,200 pf c052h122(1)5r5ga(2) c052h122(1)1r5ga(2) c052h122(1)2r5ga(2) 1,500 pf c052h152(1)5r5ga(2) c052h152(1)1r5ga(2) c052h152(1)2r5ga(2) 1,800 pf c052h182(1)5r5ga(2) c052h182(1)1r5ga(2) c052h182(1)2r5ga(2) 2,200 pf c052h222(1)5r5ga(2) c052h222(1)1r5ga(2) c052h222(1)2r5ga(2) 2,700 pf c052h272(1)5r5ga(2) c052h272(1)1r5ga(2) c052h272(1)2r5ga(2) 3,300 pf c052h332(1)5r5ga(2) c052h332(1)1r5ga(2) c052h332(1)2r5ga(2) 3,900 pf c052h392(1)5r5ga(2) c052h392(1)1r5ga(2) 4,700 pf c052h472(1)5r5ga(2) c052h472(1)1r5ga(2) 5,600 pf c052h562(1)5r5ga(2) c052h562(1)1r5ga(2) 6,800 pf c052h682(1)5r5ga(2) c052h682(1)1r5ga(2) 8,200 pf c052h822(1)5r5ga(2) c052h822(1)1r5ga(2) 0.01 f c052h103(1)5r5ga(2) c052h103(1)1r5ga(2) 0.012 f c052h123(1)5r5ga(2) c052h123(1)1r5ga(2) 0.015 f c052h153(1)5r5ga(2) c052h153(1)1r5ga(2) 0.018 f c052h183(1)5r5ga(2) c052h183(1)1r5ga(2) 0.022 f c052h223(1)5r5ga(2) c052h223(1)1r5ga(2) 0.027 f c052h273(1)5r5ga(2) c052h273(1)1r5ga(2) 0.033 f c052h333(1)5r5ga(2) c052h333(1)1r5ga(2) 0.039 f c052h393(1)5r5ga(2) c052h393(1)1r5ga(2) 0.047 f c052h473(1)5r5ga(2) c052h473(1)1r5ga(2) 0.056 f c052h563(1)5r5ga(2) 0.068 f c052h683(1)5r5ga(2) 0.082 f c052h823(1)5r5ga(2) 0.1 f c052h104(1)5r5ga(2) rated voltage (vdc) 50 100 200 voltage code 5 1 2 radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 5 table 1b C c062 style/size (0.20" lead spacing), capacitance range waterfall c062 style/size (0.20" lead spacing) rated voltage (vdc) 50 100 200 voltage code 5 1 2 capacitance capacitance tolerance capacitance code (available capacitance) 4,700 pf j = 5% k = 10% m = 20% c062h472(1)2r5ga(2) 5,600 pf c062h562(1)2r5ga(2) 6,800 pf c062h682(1)2r5ga(2) 0.056 f c062h563(1)1r5ga(2) 0.068 f c062h683(1)1r5ga(2) 0.082 f c062h823(1)1r5ga(2) 0.1 f c062h104(1)1r5ga(2) 0.12 f c062h124(1)5r5ga(2) c062h124(1)1r5ga(2) 0.15 f c062h154(1)5r5ga(2) 0.18 f c062h184(1)5r5ga(2) 0.22 f c062h224(1)5r5ga(2) 0.27 f c062h274(1)5r5ga(2) 0.33 f c062h334(1)5r5ga(2) 0.39 f c062h394(1)5r5ga(2) 0.47 f c062h474(1)5r5ga(2) 0.56 f c062h564(1)5r5ga(2) 0.68 f c062h684(1)5r5ga(2) 0.82 f c062h824(1)5r5ga(2) 1.0 f c062h105(1)5r5ga(2) rated voltage (vdc) 50 100 200 voltage code 5 1 2 (1) to complete ordering code, insert the proper character for capacitance tolerance: (see table above for character defnitions) (1) available capacitance tolerances: j, k, m (2) to complete ordering code, enter the four-digit numeric or alphanumeric "packaging c-spec ordering code." see details below: bl ank = bulk bag t2 50 = 250 pcs / 12" reel t5 00 = 500pcs / 12" reel t1 k0 = 1,000 pcs / 12" reel 73 01 = full reel qty / 12" reel 73 03 = full reel qty / 12" reel 70 61 = bulk tray these products are protected under u.s. patents 7172985 and 7670981, other patents pending, and any foreign counterparts. packaging quantities packaging options bulk bag (default) 1 bulk tray tape and reel packaging quantities 3 ordering code c-spec 2 n/a 7061 t250 t500 t1k0 7301 7303 style/ series c052h 100 pcs/bag 50 pcs/tray 250 500 1,000 2,000 n/a c062h 100 pcs/bag 40 pcs/tray 250 500 1,000 n/a 1,500 1 default packaging for this product series is "bulk bag". kemet will assume " bulk bag" packaging is required unless a valid c-spec is included in the 15th thru 18th character positions of the ordering code. for more information see "ordering information" section of this document. 1, 2 the " ordering code c-spec" is a four-digit code that follows the kemet part number and identifes any special packaging or processing requirements. failure to include a c-spec when ordering will result in the default packaging option. default packaging for this product series is "bulk bag". 3 packaging quantities reported above are considered "minimum order quantities" and are mandatory. radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 6 soldering process recommended soldering technique: ? so lder wave ? han d soldering (manual) recommended soldering profle: ? op timum wave solder profle 0 25 50 75 100 125 150 175 200 225 250 1 2 3 time (minutes) degrees ? co 4 5 6 flux zone preheat zone entrance to solder wave exit from solder wave hot air debridging exit from solder machine (time in wave ? 2 to 4 seconds) solder wave peak temperature 260oc entrance to solder machine 80oc to 120oc bottom side temperature range top side nominal 150oc maximum free air cool entrance to in-line cleaner exit from in-line cleaner (time in cleaner may be less) immersion in cleaning vapor ? hand soldering (manual) ma nu al sold er profil e with pre-heating gra du al preh eat 60 ? 120 seconds recommend 2.5oc/second soldering m aximum 3 sec onds del ta t < = 120oc gra du al c ooli ng kemet recommends following the guidelines and techniques outlined in technical bulletins f2103 and f9207. radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 7 table 2 C performance & reliability: test methods and conditions stress reference test or inspection method solderability jCstdC002 method a at 235c, category 3 temperature cycling jesd22 method jaC104 50 cycles (?55c to 220c), measurement at 24 4 hours after test conclusion. 30 minutes kemet defned test peel to failure (25oc and 200oc): 4 lbs (1.84 kg) minimum vibration milCstdC202 method 204 5g for 20 minutes, 12 cycles each of 3 orientations. note: use 8" x 5" pcb. 031" thick 7 secure points on one long side and 2 secure points at corners of opposite sides. parts mounted within 2" from any secure point. test from 10 C 2000 hz. resistance to soldering heat milCstdC202 method 210 test condition b, solder dip. note: no preheat of samples. terminal strength milCstdC202 method 211 test condition a. 454g 5 C 10 s; bend test ? 227g, 3 bends mechanical shock milCstdC202 method 213 test condition d. figure 1 of method 213. resistance to solvents milCstdC202 method 215 add aqueous wash chemical C okem clean or equivalent. storage & handling the un-mounted storage life of a through-hole (leaded) ceramic capacitor is dependent upon storage and atmospheric conditions as well as packaging materials. while the ceramic chips enveloped under the epoxy coating themselves are quite robust in most environments, solderability of the wire lead on the fnal epoxy-coated product will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperature and exposure to direct sunlightCreels may soften or warp, and tape peel force may increase. kemet recommends storing the un-mounted capacitors in their original packaging, in a location away from direct sunlight, and where the temperature and relative humidity do not exceed 40 degrees centigrade and 70% respectively. for optimum solderability, capacitor stock should be used promptly, preferably within 18 months of receipt. for applications requiring pre-tinning of components, storage life may be extended if solderability is verifed. before cleaning, bonding or molding these devices, it is important to verify that your process does not affect product quality and performance. kemet recommends testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any of these processes. radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 8 application notes working voltage: application voltage (vp-p or vo-p) must not exceed the voltage rating of the capacitor. irregular voltages can be generated for a transient period of time when voltage is initially applied and/or removed from a circuit. it is important to choose a capacitor with a voltage rating greater than or equal to these irregular voltages. operating temperature and self-generating heat: the surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. be sure to take into account the heat generated by the capacitor itself. when the capacitor is used in a high-frequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. temperature rise due to self-generated heating should not exceed 20c (while operated at an atmosphere temperature of 25c). failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial dispersion when the product is used. radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 9 construction base metal electrode dielectric material (cazro 3 ) detailed cross section barrier layer (ni) base metal (cu) finish layer (sn10/pb88/ag2) epoxy encapsulation lead attach solder (sn10/pb88/ag2) finish layer (sn10/pb88/ag2) barrier layer (ni) base metal (cu) lead attach solder (sn10/pb88/ag2) inner electrodes (ni) epoxy encapsulation inner electrodes (ni) core metal barrier layer 1 barrier layer 2 finish layer steel cu ni au lead wire precious metal electrode dielectric material (batio 3 ) detailed cross section epoxy encapsulation lead attach solder (sn10/pb88/ag2) chip end metalization (solderable silver) lead attach solder (sn10/pb88/ag2) inner electrodes (pdag) epoxy encapsulation inner electrodes (pdag) chip end metalization (solderable silver) core metal barrier layer 1 barrier layer 2 finish layer steel cu ni au lead wire radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 10 marking back front style/size dielectric rated capacitance specification/series capacitance tolerance code rated voltage (vdc) kemet id date code date code 14 20 manufacturing year: 14 = 2014 manufacturing week: 20 = week 20 (of mfg. calendar year) radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 11 lead tape & reel packaging information kemet offers standard reeling of molded radial leaded capacitors in accordance with eia standard 468. parts are taped to a tag board carrier strip, and wound on a reel as shown in figure 1. kraft paper interleaving is inserted between the layers of capacitors on the reel. t radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 12 table 3 C ceramic radial tape and reel dimensions metric will govern constant dimensions millimeters (inches) d 0 0.2 (0.008) p 0 0.3 (0.012) p 0.3 (0.012) p 2 0.7 (0.028) ?h maximum l 1 maximum t maximum t maximum w + 1.0/?0.5 (+0.039/?0.020) w 0 minimum w 2 maximum 4.00 (0.157) 12.7 (0.500) 12.7 (0.500) 6.35 (0.250) 1.0 (0.039) 1.0 (0.039) 0.9 (0.035) 2.0 (0.079) 18.0 (0.709) 5.0 (0.197) 3.0 (0.118) variable dimensions millimeters (inches) f +0.6 (0.024) ?0.2 (0.008) note 1 p 1 0.7 (0.028) note 1 h minimum note 2 h 0 0.5 (0.630) note 3 2.54 (0.100) 5.08 (0.200) 18.0 (0.709) 16.0 (0.024) 4.32 (0.170) 3.89 (0.153) 5.08 (0.200) 3.81 (0.150) 5.59 (0.220) 3.25 (0.128) 6.98 (0.275) 2.54 (0.100) 7.62 (0.300) 2.24 (0.088) 9.52 (0.375) 7.62 (0.300) 10.16 (0.400) 7.34 (0.290) 12.06 (0.475) 6.35 (0.250) 14.60 (0.575) 5.08 (0.200) 17.14 (0.675) 3.81 (0.15) 1. measured at the egress from the carrier tape, on the component side. 2. straight lead conf guration part types only. 3. formed (bent) lead conf guration part types only. symbol reference table d 0 sprocket hole diameter p 0 sprocket hole pitch p component pitch f lead spacing p 1 sprocket hole center to adjacent component lead p 2 sprocket hole center to component center h height to seating plane (straight leads only) h 0 height to seating plane (formed leads only) h 1 component height above tape center ?h radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com c1 074_ht_x7r_radial_molded ? 8/10/2016 13 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet is a registered trademark of kemet electronics corporation. radial through-hole multilayer ceramic capacitors high temperature 200 c, radial, molded, x7r dielectric, 50 ? 200 vdc (industrial grade)

▲Up To Search▲

Price & Availability of C052H105J5R5GA7301

	To Download C052H105J5R5GA7301 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .